When the warp is transferred to the loom the rod which was placed in the upper shed remains there, or another rod, straighter and smoother, is substituted for it; but with the lower shed, healds are applied to the anterior threads and the rod is withdrawn.

Sec.  V. The mode of applying the healds is simple:  (1) the weaver sits facing the loom in the position for weaving; (2) she lays at the right (her right) side of the loom a ball of string which she knows contains more than sufficient material to make the healds; (3) she takes the end of this string and passes it to the left through the shed, leaving the ball in its original position; (4) she ties a loop at the end of the string large enough to admit the heald-rod; (5) she holds horizontally in her left hand a straightish slender rod, which is to become the heald-rod—­its right extremity touching the left edge of the warp—­and passes the rod through the loop until the point of the stick is even with the third (second anterior from the left) thread of the warp; (6) she puts her finger through the space between the first and third threads and draws out a fold of the heald-string; (7) she twists this once around, so as to form a loop, and pushes the point of the heald-rod on to the right through this loop; (8) she puts her finger into the next space and forms another loop; (9) and so on she continues to advance her rod and form her loops from left to right until each of the anterior (alternate) warp-threads of the lower shed is included in a loop of the heald; (10) when the last loop is made she ties the string firmly to the rod near its right end.

When the weaving is nearly done and it becomes necessary to remove the healds, the rod is drawn out of the loops, a slight pull is made at the thread, the loops fall in an instant, and the straightened string is drawn out of the shed.  Illustrations of the healds may be seen in Plates XXXV and XXXVIII and Figs. 42, 44, and 46, that in Fig. 46 being the most distinct.

Sec.  VI.  In making a blanket the operator sits on the ground with her legs folded under her.  The warp hangs vertically before her, and (excepting in a case to be mentioned) she weaves from below upwards.  As she never rises from this squatting posture when at work, it is evident that when she has woven the web to a certain height further work must become inconvenient or impossible unless by some arrangement the finished web is drawn downwards.  Her cloth-beam does not revolve as in our looms, so she brings her work within easy reach by the following method:  The spiral rope (Plate XXXVIII and Fig. 42) is loosened, the yarn-beam is lowered to the desired distance, a fold is made in the loosened web, and the upper edge of the fold is sewed down tightly to the cloth-beam.  In all new blankets over two feet long the marks of this sewing are to be seen, and they often remain until the blanket is worn out.  Plate XXXV, representing a blanket nearly finished, illustrates this procedure.