Concentric Conductors. In one the core is made from a double strand of strong lock stitch twine, over which is placed a linen braid.  Then the tip conductor, which is of stranded copper tinsel, is braided on.  This is then covered with two layers of tussah silk, laid in reverse wrappings, then there is a heavy cotton braid, and over the latter a linen braid.  The sleeve conductor, which is also of copper tinsel, is then braided over the structure so formed, after which two reverse wrappings of tussah silk are served on, and this is covered by a cotton braid and this in turn by a heavy linen or polished cotton braid.  The plug end of the cord is reinforced for a length of from 12 to 18 inches by another braiding of linen or polished cotton, and the whole cord is treated with melted beeswax to make it moisture-proof and durable.

[Illustration:  Fig. 265.  Switchboard Cord]

Steel Spiral Conductors. In another cord that has found much favor the two conductors are formed mainly by two concentric spiral wrappings of steel wire, the conductivity being reinforced by adjacent braidings of tinsel.  The structure of such a cord is well shown in Fig. 265.  Beginning at the right, the different elements shown are, in the order named, a strand of lock stitch twine, a linen braiding, into the strands of which are intermingled tinsel strands, the inner spiral steel wrapping, a braiding of tussah silk, a linen braiding, a loose tinsel braiding, the outer conductor of round spiral steel, a cotton braid, and an outside linen or polished cotton braid.  The inner tinsel braiding and the inner spiral together form the tip conductor while the outer braiding and spiral together form the sleeve conductor.  The cord is reinforced at the plug end for a length of about 14 inches by another braiding of linen.  The tinsel used is, in each case, for the purpose of cutting down the resistance of the main steel conductor.  These wrappings of steel wire forming the tip and sleeve conductors respectively, have the advantage of affording great flexibility, and also of making it certain that whatever strain the cord is subjected to will fall on the insulated braiding rather than on the spiral steel which has in itself no power to resist tensile strains.

Parallel Tinsel Conductors. Another standard two-conductor switchboard cord is manufactured as follows:  One conductor is of very heavy copper tinsel insulated with one wrapping of sea island cotton, which prevents broken ends of the tinsel or knots from piercing through and short-circuiting with the other conductor.  Over this is placed one braid of tussah silk and an outer braid of cotton.  This combines high insulation with considerable strength.  The other conductor is of copper tinsel, not insulated, and this is laid parallel to the thrice insulated conductor already described.  Around these two conductors is placed an armor of spring brass wire in spiral form, and over this a close, stout braid of glazed cotton.  This like the others is reinforced by an extra braid at the plug end.