The Consideration of which Particulars will easily make the Third Position probable, that is, that the parts of the drop will be of a very hard, though of a rarified Texture; for if the outward parts of the Drop, by reason of its hard crust, will indure very little Contraction, and the agil Particles, included in those bubbles, by the losing of their agitation, by the decrease of the Heat, lose also most part of their Spring and Expansive power; it follows (the withdrawing of the heat being very sudden) that the parts must be left in a very loose Texture, and by reason of the implication of the parts one about another, which from their sluggishnes and glutinousness I suppose to be much after the manner of the sticks in a Thorn-bush, or a Lock of Wool; it will follow, I say, that the parts will hold each other very strongly together, and indeavour to draw each other neerer together, and consequently their Texture must be very hard and stiff, but very much rarified.
And this will make probable my next Position, That the parts of the Glass are under a kind of tension or flexure, out of which they indeavour to extricate and free themselves, and thereby all the parts draw towards the Center or middle, and would, if the outward parts would give way, as they do when the outward parts cool leisurely (as in baking of Glasses) contract the bulk of the drop into a much less compass. For since, as I proved before, the Internal parts of the drop, when fluid, were of a very rarified Texture, and, as it were, tos’d open like a Lock of Wool, and if they were suffered leisurely to cool, would be again prest, as it were, close together: And since that the heat, which kept them bended and open, is removed, and yet the parts not suffered to get as neer together as they naturally would; It follows, that the Particles remain under a kind of tension and flexure, and consequently have an indeavour to free themselves from that bending and distension, which they do, as soon as either the tip be broken, or as soon as by a leisurely heating and cooling, the parts are nealed into another posture.