| 5 Post oak | 1,099 | 1,139 | 1,068 | 1,081 | | 6 Black oak | 1,069 | 1,093 | 1,083 | 1,031 | | 7 Red oak | 1,043 | 1,107 | 1,020 | 1,002 | | 8 White ash | 1,046 | 1,121 | 1,000 | 1,017 | | 9 Beech | 942 | 1,012 | 897 | 918 | | 10 Sugar maple | 937 | 992 | 918 | 901 | | 11 Rock elm | 910 | 954 | 883 | 893 | | 12 Hackberry | 799 | 829 | 795 | 773 | | 13 Slippery elm | 788 | 919 | 757 | 687 | | 14 Yellow birch | 778 | 827 | 768 | 739 | | 15 Tupelo | 738 | 814 | 666 | 733 | | 16 Red maple | 671 | 766 | 621 | 626 | | 17 Sycamore | 608 | 664 | 560 | 599 | | 18 Black ash | 551 | 565 | 542 | 546 | | 19 White elm | 496 | 536 | 456 | 497 | | 20 Basswood | 239 | 273 | 226 | 217 | | | | | | | | Conifers | | | | | | | | | | | | 1 Longleaf pine | 532 | 574 | 502 | 521 | | 2 Douglas fir | 410 | 415 | 399 | 416 | | 3 Bald cypress | 390 | 460 | 355 | 354 | | 4 Hemlock | 384 | 463 | 354 | 334 | | 5 Tamarack | 384 | 401 | 380 | 370 | | 6 Red pine | 347 | 355 | 345 | 340 | | 7 White fir | 346 | 381 | 322 | 334 | | 8 Western yellow pine | 328 | 334 | 307 | 342 | | 9 Lodgepole pine | 318 | 316 | 318 | 319 | | 10 White pine | 299 | 304 | 294 | 299 | | 11 Engelmann pine | 266 | 272 | 253 | 274 | | 12 Alpine fir | 241 | 284 | 203 | 235 | |-----------------------------------------------------------
--------| | NOTE.--Black locust and hickory are not included in this table, | | but their position would be near the head of the list. | |-----------------------------------------------------------
--------|

Tests for either form of hardness are of comparative value only.  Tests for indentation are commonly made by penetrations of the material with a steel punch or ball.[16] Tests for abrasion are made by wearing down wood with sandpaper or by means of a sand blast.

[Footnote 16:  See articles by Gabriel Janka listed in bibliography, pages 151-152.]

CLEAVABILITY

Cleavability is the term used to denote the facility with which wood is split.  A splitting stress is one in which the forces act normally like a wedge. (See Fig. 21.) The plane of cleavage is parallel to the grain, either radially or tangentially.