At the height of the plantation system’s career, from 1815 to 1860, indigo production was a thing of the past; hemp was of negligible importance; tobacco was losing in the east what it gained in the west; rice and sea-island cotton were stationary; but sugar was growing in local intensity, and upland cotton was “king” of a rapidly expanding realm.  The culture of sugar, tobacco and rice has been described in preceding chapters; that of the fleecy staple requires our present attention.

The outstanding features of the landscape on a short-staple cotton plantation were the gin house and its attendant baling press.  The former was commonly a weatherboarded structure some forty feet square, raised about eight feet from the ground by wooden pillars.  In the middle of the space on the ground level, a great upright hub bore an iron-cogged pinion and was pierced by a long horizontal beam some three feet from the ground.  Draught animals hitched to the ends of this and driven in a circular path would revolve the hub and furnish power for transmission by cogs and belts to the gin on the floor above.  At the front of the house were a stair and a platform for unloading seed cotton from the wagons; inside there were bins for storage, as well as a space for operating the gin; and in the rear a lean-to room extending to the ground level received the flying lint and let it settle on the floor.  The press, a skeleton structure nearby, had in the center a stout wooden box whose interior length and width determined the height and thickness of the bales but whose depth was more than twice as great as the intended bale’s width.  The floor, the ends and the upper halves of the sides of the box were built rigidly, but the lower sides were hinged at the bottom, and the lid was a block sliding up and down according as a great screw from above was turned to left or right.  The screw, sometimes of cast iron but preferably of wood as being less liable to break under strain without warning, worked through a block mortised into a timber frame above the box, and at its upper end it supported two gaunt beams which sloped downward and outward to a horse path encircling the whole.  A cupola roof was generally built on the revolving apex to give a slight shelter to the apparatus; and in some cases a second roof, with the screw penetrating its peak, was built near enough the ground to escape the whirl of the arms.  When the contents of the lint room were sufficient for a bale, a strip of bagging was laid upon the floor of the press and another was attached to the face of the raised lid; the sides of the press were then made fast, and the box was filled with cotton.  The draught animals at the beam ends were then driven round the path until the descent of the lid packed the lint firmly; whereupon the sides were lowered, the edges of the bagging drawn into place, ropes were passed through transverse slots in the lid and floor and tied round the bale in its bagging, the pressure